Items marked "In stock" are shipped:
- ordered by 10:00 on the same day
- ordered after 10:00 the next day

WATTROUTER® ECO

Code: 1415
182 € 220,22 € incl. VAT
In stock

WATTrouter ECO is a programmed controller for optimizing self-consumption for buildings with a photovoltaic power plant installed. The current measuring range is 3x20A, continuous load 3x40A. After proper installation and adjustment, the controller perfectly optimizes the use of the excess energy produced by your PV plant. The return on the equipment according to the output of the FVE and the possibilities of using the produced energy can be as little as 4 months!

Detailed information

Product detailed description

For a complete description of functionality and usage, see this article.

WATTrouter ECO is based on the development of WATTrouter M, integrates some of its features in the standard version while maintaining a very low purchase price.

The WATTrouter ECO is completely noiseless, as the power triacs known from the WATTrouter CWx have been replaced by SSR outputs to which passively cooled power SSR relays are connected. Thus, a total of 4 SSR outputs are available. This eliminates problems with fan noise, dust and the need to repair the controller in the event of damage to the power triacs by a short circuit. Power SSR can also be dimensioned according to both current carrying capacity and cooling options.

In order to put the continuous regulation of the appliance (e.g. boiler) into operation according to the surplus, it is always necessary to purchase at least one power semiconductor relay of the WATTrouter ECO - SSR.

Optional software extensions are also available for the WATTrouter ECO. These include some functions that can be found in the standard equipment of the WATTrouter M. These optional functions can be purchased additionally and activated in the controller.

The WATTrouter ECO can also be retrofitted with wireless data transmission using the SC-Gateway and SC-Router modules. These modules enable full-fledged wireless transmission between 2 controllers, we now support all types of output controls. Wireless sockets and ENcontrol modules can also be used. This interface can be used wherever it would be difficult to make a cable connection between the controller and the appliance.

WATTrouter ECO is an ideal choice for users who do not want to invest a lot of money in surplus regulation, do not need increased connection comfort (monitoring via the Internet, etc.), but need a reliable and functional product.

WATTrouter ECO consists of a measuring module and its own controller. The controller settings are made from a personal computer (notebook, mini-notebook, or desktop PC) using the USB interface.

Note: If you are a WATTrouter CWx or WATTrouter CWx SSR user, then you can only purchase a separate controller. The measuring module is functionally identical for both types, it only has a different label.

Additional parameters

Category: Dynamic power control
Weight: 2 kg

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.