Items marked "In stock" are shipped:
- ordered by 10:00 on the same day
- ordered after 10:00 the next day

PWM/0-10V converter

Code: 6045
18 € 21,78 € incl. VAT
1 week delivery
Delivery to:
9.4.2024

This converter can be used wherever it is necessary to connect the output modulated by a PWM signal with input 0-10V. The converter is DIN rail compatible, 1 module wide.

Within our product range it can be used, for example, to connect the SSR outputs of the WATTrouter M or Heating Control to the 0-10V control input of a heat pump outdoor unit (if it supports it). Then you can directly control the power of this unit.

Detailed information

Product detailed description

PURPOSE

  • The converter can be used wherever it is necessary to connect the output modulated by PWM signal to 0-10V input. Within the product range of the manufacturer it is used to connect controllers such as WATTrouter M or Heating Control to the 0-10V control input of an outdoor heat pump unit. Then you can directly control the output power of this unit.

CONNECTION

  • Connect the PWM converter to the PWM output of the control device according to the specifications of the relevant product (e.g. EXT1 on Heating Control). Observe PWM signal polarity. Connect an external 12 VDC power supply to terminals GND (negative) and + 12V (positive). Connect the analog signal 0-10V to the input with the same name which is available on controlled product (e.g. heat pump control unit).

SPECIFICATION

  • Power supply: 12 VDC / 10 mA
  • Current consumption: Max. 10 mA
  • Power supply – reverse polarity protection: Yes
  • Input – PWM base frequency: 50 Hz – 500 Hz
  • Input – voltage: Max. 6 VDC (between PWM+ and PWM-)
  • Input – reverse polarity protection: Yes
  • Output – voltage: 0-10 VDC, load max. 5 mA
  • Adjustable conversion linearity: Yes, after lifting the lid appropriate converter range can be adjusted with a small screwdriver
  • Galvanic isolation input (terminals PWM + and PWM -) / output (terminals GND, 0-10V, +12V): Yes
  • Working position: Any
  • Mounting: DIN rail 35mm
  • Pollution degree: 2
  • Operational temperature range: -20°C to +40°C
  • Storage temperature range: -40 °C to +80 °C
  • IP code: IP 20
  • Dimensions (WxHxD): 17,6x100x64mm (1 module)
  • Weight: 50g
  • Warranty period: 24 months

 

Be the first who will post an article to this item!

Only registered users may post articles. Please log in or register.