Webasto PURE Home | cable Type 2 | "Mennekes" | up to 22 kW
Code: 5110316A 5110014A Choose variantProduct detailed description
 |
Webasto Pure - Awarded the Plus X Award for quality, design and ease of use. The Plus X Award is the world's largest innovation award for technology, sports and lifestyle and honors brands for the quality and innovation lead of their products |
The Webasto Pure Home impresses with these benefits:
- Home station - ideal for customers with their own driveway or garage
- Adjustable charging capacity from 3.7 kW to 22 kW, as well as 4.5 m permanently connected charging cable with charging coupler type 2 and integrated cable suspension
- Up to ten times faster than using a standard domestic socket
- Simple and convenient operation
- Highest electrical safety thanks to own fuse protection
- Affordable price and expert service
- High quality "Made in Germany"
- Complies with protection classes IP54 and IK07 for outdoor installation
The Webasto Pure Home charging station (protection classes IP54 and IK07) is a home charging station. This means that it may only be installed on private property and only where access to the charging station is restricted. It may therefore be installed in private garages, for example, but not in multi-storey car parks. The Webasto Pure Home must be installed on the wall at a height of at least 90 cm (floor to bottom edge of housing).
✓ Only the following installation locations are permitted: private driveways, private garages and carports.
X The following installation locations are not permitted: car parks, multi-storey car parks, multiple garages, etc.+
Electrical characteristics |
|
| Nominal current (A) (configurable connected load values) |
Adjustable between 16, 20 and 32 1- phase or 3-phase |
| Line voltage (V) | 230/400 AC (Europe) |
| Grid frequency (Hz) | 50 |
| Overvoltage category | III in accordance with EN 60664 |
| Safety standard | According to IEC 61508 |
| Protection class | I |
| Residual current device (installation side) | RCD IΔn = 30mA Typ A |
| DC fault current monitoring device (integrated) |
6 mA RDC-MD |
Connections |
|
| Cable feed | on-wall or in-wall mounted |
| Connection cross section (wire dimension) | The minimum cross-section for a standard installation is 6mm² (for 16A) and 10 mm² (for 32A), depending on the cable and type of installation. |
| Power supply terminal |
Connection line: |
| Cable | Type2 charging cable: up to 32A / 400 VAC in accordance with EN 62196-1 and EN 62196-2 length of 4.5 m Cable bracket integrated |
| Output voltage (V) | 230/400 AC |
| Max. charging capacity (kW) | 3.7 to 22 (adjustable) |
Function |
|
| Locking mechanism | Key-operated switch for clearance to initiate charging |
| Display | RGB LEDs Buzzer |
| Operation | Capacitive button |
Mechanical Data |
|
| Dimensions (w x h x d) | 225 x 437 x 85 |
| Dimensions [incl assembly frame] (w x h x d) | 225 x 437 x 107 |
| Weight (Kg) | 5,56 |
| IP protection class device | IP54 |
| Protection against mechanical impact | IK07 |
Ambient Conditions |
|
| Operating temperature range (°C) | -25 to +55 (without direct solar radiation) |
| Temperature behavior | The charging current is constantly provided within the operating temperature range. When temperatures are exceeded, the charging current is gradually reduced to 16 amperes, and shutdowns may also occur. Following a waiting phase, the charging process is independently re-initiated. |
| Storage temperature range (°C) | -25 to +80 |
| Permissible relative humidity (%) | 5 to 95 non-condensing |
| Altitude (m) | Max. 3,000 m above sea level |
Additional parameters
| Category: | Charging station |
|---|---|
| Warranty: | 2 years |
| Mode: | 3 |
| Rated current: | 16 / 32 A |
| Input power: | 1/3 phases |
| Working voltage: | 230/400 V |
| Output power: | 3,7/11 kW - 7,4/22 kW |
| Degree of protection: | IP54 |
| Working temperature: | -25°C to +40°C |
| Dimensions: | 225mm x 437mm x 107mm |
| Mounting: | Wall mounting / Stand |